abrasion wear的例句大全

The wear mechanism under all test situations is abrasion wear and plough wear.

所有润滑条件下试样均以磨粒磨损或犁削磨损为主.

The physical wearing process of 20 + # steel by SBR is mainly resulted from the abrasion wear.

结果表明,20 # 钢被磨损的物理过程为磨粒磨损(微切削).

The abrasion wear mechanism of Mn copper-nickel alloy matrix-cast chromium carbide composite was studied.

研究了真空熔铸法制备的锰白铜基铸造碳化铬复合材料的二体磨料磨损机理.

Wear resistance of the coatings was tested on abrasion tester and the wear appearance of the coatings was investigated by SEM.

在磨损试验机上对其耐磨性进行测试，同时利用扫描电镜对试样的磨损形貌进行观察分析。

The effect of varying mates on abrasive wear character of martensitic wear-resistant steel by MLD-10 type impact abrasion tester was investigated.

讨论了在动载三体磨粒磨损条件下，马氏体钢配副变化对磨粒磨损系统耐磨性的影响。

Content of the free-radical were determined using the paramagnetic resonance method. Result shows that high speed steel cutter blade wear seriously during fiber cutting, its main wear mechanism is abrasion of TiO_2 particles in fibers.

结果表明：切割涤纶半消光纤维时，高速钢刀片的磨损很快，主要磨损机制为纤维中TiO2粒子的磨粒磨损；

Abrasion resistant radial wear ring is standard on Model 6123 and smaller. Hardened SS Wear Rings optional on all models.

耐磨的径向磨损环。配置在6123型号和更小的泵上。

Wear tests of 45 steel, as standard sample, and D8 、 D9 wear-resisting surfacing materials were carried out by sand slurry abrasion tester with vertical multi-clamps under concrete condition.

在多头立式磨损试验机上，以45钢（正火态）作为标准试样，选用D8、D9两种耐磨堆焊材料，在混凝土工况条件下进行了磨损试验。

To wear a surface away by weathering, abrasion, or foreign particle.

因天气或外来颗粒等原因导致表面被磨蚀.

Study of Wear-resistant and Abrasion Mechanism of Co-Cr-W Hardfacing Alloys.

Co-Cr-W堆焊合金耐磨性及耐磨机理的研究.

Best for the high overlay welding requirement for hardness, resistance to wear, abrasion, and erosion.

适用于硬度要求高, 耐磨损、耐腐蚀材料堆焊.

The micro-scale abrasive wear behaviors of TAMZ alloy were studied using a TE66 micro-scale abrasion tester.

采用TE66试验机对新型TAMZ钛合金的微磨粒磨损行为进行了研究。

The Abrasion Test of Cast Wear Resistant Materials in Nitric Acid

铸造耐磨材料在硝酸中的磨粒磨损试验研究

Ceramics tile are widely used because they have many good characteristics sue has heat-resistance, abrasion hardness, wear-resistance, acid-proof, low-expansion and low-price.

陶瓷玻化砖具有耐高温、高硬度、耐磨损、耐腐蚀、低膨胀系数、价格便宜等特点，因而其用途非常广泛。

Study shows that quenched boron eutectic structure possesses the excellent wear abrasion property.

研究表明：硼共晶组织经淬火后，具有优良的抗磨粒磨损性能。